Vendido

Pigmento de Nacarat

Tamanho

Tools

Os Pigmentos de Reflexões de Pó metálicos compuseram da mica nano-partículas cobertas de vários pigmentos orgânicos e inorgânicos para criar pearlescent e efeitos iridescentes que imitam o aspeto natural de pedra e formações de rocha.

Estes pigmentos únicos projetam-se para ser campo misto com 100% de corpos sólidos pasta para guardar papeis de epóxi clara. Quando as partículas metálicas se misturam com o epóxi dão ao revestimento um brilho que reflete a luz e cria e olho pegando a cor dramática.

Para os efeitos a cores e dinâmicos mais vívidos recomendamos 4 onças mínimas ou mais do pigmento de cada galão de epóxi.

  • Exemplo, 3 galões de epóxi necessitariam um total de 12 onças do pigmento de pó metálico.
  • Pó de mistura com resina primeiro antes de acrescentar hardener.
  • Sem falta apresente-se fundo colorem primeiro, usando um dos nossos conjuntos de epóxi coloridos um dia prévios antes de começar processo metálico.
  • A cobertura é Pés Quadrados aproximadamente 55-60 por galão usando o rodo de entalhe de borracha de 1/8 x 1/8 polegadas ou a trolha mágica.
  • O pigmento metálico do curso de 4 horas seguintes começará a tomar uma nova forma, novas olhadas e fins assombrosos.

Desmentido: As cores representam-se o mais estreitamente possível. As variações devem esperar-se devido a diferenças em condições substrates, espessura da aplicação, misturando cores, técnica aplicada, cor do casaco de escorvador inicial. Altamente recomendamos que um teste/mofa se execute na tábua de cimento antes da aplicação real.

Square Foot Calculator

What are you looking for?

Flakes Epoxy System
Micas - Coloredepoxies
Tipo
Tamanho
Stone Series Flake - Coloredepoxies
Tipo
Tamanho do Chip
Wood flake chips - Coloredepoxies
Tipo
Tamanho
Crystal Flake Glitter - Coloredepoxies
Tipo
Glitter - Coloredepoxies
Cor
Glitter Accent Flakes
Type
domino FB-411 3G2020 1/4"
stonehenge FB-427 3G2010 1/4"
shoreline FB-421 3G1070 1/4"
Tidal wave FB-802 3G2030 1/4"
savannah CSF-1047284 3G1060 1/4"
outback FB-517 3G1040 1/4"
madras FB-706 3G2010 1/4"
dolerite F9311 3G2010 1/4"
creekbed FB-716 3G1040 1/4"
aurora CFS-1047283 3G2020 1/4"
appalachian FB-812 3G1090 1/4"
Marbelized Metallic Epoxy System
Solid Color Epoxy System

Enter Square Feet

Total Size FT2

Result

Total

How it works?

FLAKES

1. Choose from one of the 7 custom flake systems.

2. Choose color.

3. Select size of flakes (1/4” is standard)

4. Enter square footage.

5. Add to cart.

6. Before proceeding to check out you can change color on colored epoxy resin kit to closely match flake color.

MARBELIZED METALLIC EPOXY

1. Choose one of the 12 solid colors first this will be the primer and backdrop color.

2. Choose metallic pigments.

3. Enter your square footage.

4.Pending the size of your job you will be able to choose more than one pigment, rule of thumb the more splash colors you add the better the effects.

Solid Color

1. Pick any color, System will calculate enough epoxy for two rolled on applications. Day 1 the primer & Day 2 the final finish coat.
Divide the cost of goods by your square footage this will give you precise square foot cost.

FLAKES

1. Choose from one of the 7 custom flake systems.

2. Choose color.

3. Select size of flakes (1/4” is standard)

4. Enter square footage.

5. Add to cart.

6. Before proceeding to check out you can change color on colored epoxy resin kit to closely match flake color.

MARBELIZED METALLIC EPOXY

1. Choose one of the 12 solid colors first this will be the primer and backdrop color.

2. Choose metallic pigments.

3. Enter your square footage.

4.Pending the size of your job you will be able to choose more than one pigment, rule of thumb the more splash colors you add the better the effects.

Solid Color

1. Pick any color, System will calculate enough epoxy for two rolled on applications. Day 1 the primer & Day 2 the final finish coat.
Divide the cost of goods by your square footage this will give you precise square foot cost.

FLAKES

1. Choose from one of the 7 custom flake systems.

2. Choose color.

3. Select size of flakes (1/4” is standard)

4. Enter square footage.

5. Add to cart.

6. Before proceeding to check out you can change color on colored epoxy resin kit to closely match flake color.

MARBELIZED METALLIC EPOXY

1. Choose one of the 12 solid colors first this will be the primer and backdrop color.

2. Choose metallic pigments.

3. Enter your square footage.

4.Pending the size of your job you will be able to choose more than one pigment, rule of thumb the more splash colors you add the better the effects.

Solid Color

1. Pick any color, System will calculate enough epoxy for two rolled on applications. Day 1 the primer & Day 2 the final finish coat.
Divide the cost of goods by your square footage this will give you precise square foot cost.