Pigmento da cabana

Tamanho

Tools

Reflexões em pó metálico Pigmentos compostos de nanopartículas mica revestidas com vários pigmentos orgânicos e inorgânicos para criar efeitos perolados e iridescentes que imitam o olhar natural das formações de pedra e rocha.

Estes pigmentos únicos são projetados para serem misturados em campo com um aglutinante epóxi 100% sólido. Quando as partículas metálicas são misturadas com epóxi, elas dão ao revestimento um brilho que reflete a luz e cria e chama a atenção a cor dramática.

Para a cor mais vívida e efeitos dinâmicos recomendamos mínimo de 4 oz ou mais de pigmento para cada galão de epóxi.

  • Por exemplo, um 3 galão de epóxi exigiria um total de 12 oz de pigmento em pó metálico.
  • Misture o pó com a resina antes de adicionar o endurecedor.
  • Certifique-se de aplicar a cor de fundo primeiro, usando um de nossos kits epóxi coloridos um dia antes de iniciar o processo metálico.
  • A cobertura é de aproximadamente 55-60 Sq.Ft por galão usando 1/8" x 1/8" de squeegee de borracha ou espátula mágica.
  • O pigmento metálico para o decorrer das próximas 4 horas começará a tomar uma nova forma, novos looks e acabamentos incríveis.

Aviso: As cores são representadas o mais de perto possível. As variações devem ser esperadas devido a diferenças nas condições dos substratos, espessura da aplicação, mistura de cores, técnica de aplicação, cor do revestimento primer inicial. Recomendamos que um teste/simulação seja realizado no quadro de cimento antes da aplicação real.

Square Foot Calculator

What are you looking for?

Flakes Epoxy System
Micas - Coloredepoxies
Tipo
Tamanho
Stone Series Flake - Coloredepoxies
Tipo
Tamanho do Chip
Wood flake chips - Coloredepoxies
Tipo
Tamanho
Crystal Flake Glitter - Coloredepoxies
Tipo
Glitter - Coloredepoxies
Cor
Glitter Accent Flakes
Type
domino FB-411 3G2020 1/4"
stonehenge FB-427 3G2010 1/4"
shoreline FB-421 3G1070 1/4"
Tidal wave FB-802 3G2030 1/4"
savannah CSF-1047284 3G1060 1/4"
outback FB-517 3G1040 1/4"
madras FB-706 3G2010 1/4"
dolerite F9311 3G2010 1/4"
creekbed FB-716 3G1040 1/4"
aurora CFS-1047283 3G2020 1/4"
appalachian FB-812 3G1090 1/4"
Marbelized Metallic Epoxy System
Solid Color Epoxy System

Enter Square Feet

Total Size FT2

Result

Total

How it works?

FLAKES

1. Choose from one of the 7 custom flake systems.

2. Choose color.

3. Select size of flakes (1/4” is standard)

4. Enter square footage.

5. Add to cart.

6. Before proceeding to check out you can change color on colored epoxy resin kit to closely match flake color.

MARBELIZED METALLIC EPOXY

1. Choose one of the 12 solid colors first this will be the primer and backdrop color.

2. Choose metallic pigments.

3. Enter your square footage.

4.Pending the size of your job you will be able to choose more than one pigment, rule of thumb the more splash colors you add the better the effects.

Solid Color

1. Pick any color, System will calculate enough epoxy for two rolled on applications. Day 1 the primer & Day 2 the final finish coat.
Divide the cost of goods by your square footage this will give you precise square foot cost.

FLAKES

1. Choose from one of the 7 custom flake systems.

2. Choose color.

3. Select size of flakes (1/4” is standard)

4. Enter square footage.

5. Add to cart.

6. Before proceeding to check out you can change color on colored epoxy resin kit to closely match flake color.

MARBELIZED METALLIC EPOXY

1. Choose one of the 12 solid colors first this will be the primer and backdrop color.

2. Choose metallic pigments.

3. Enter your square footage.

4.Pending the size of your job you will be able to choose more than one pigment, rule of thumb the more splash colors you add the better the effects.

Solid Color

1. Pick any color, System will calculate enough epoxy for two rolled on applications. Day 1 the primer & Day 2 the final finish coat.
Divide the cost of goods by your square footage this will give you precise square foot cost.

FLAKES

1. Choose from one of the 7 custom flake systems.

2. Choose color.

3. Select size of flakes (1/4” is standard)

4. Enter square footage.

5. Add to cart.

6. Before proceeding to check out you can change color on colored epoxy resin kit to closely match flake color.

MARBELIZED METALLIC EPOXY

1. Choose one of the 12 solid colors first this will be the primer and backdrop color.

2. Choose metallic pigments.

3. Enter your square footage.

4.Pending the size of your job you will be able to choose more than one pigment, rule of thumb the more splash colors you add the better the effects.

Solid Color

1. Pick any color, System will calculate enough epoxy for two rolled on applications. Day 1 the primer & Day 2 the final finish coat.
Divide the cost of goods by your square footage this will give you precise square foot cost.