Choose Your Epoxy Floor Kit
Choose colored epoxy for a solid-color floor or decorative base, or clear epoxy resin for a compatible clear or metallic layer. Both are two-component, 100% solids, zero-VOC systems. Follow the product TDS, SDS and kit label for preparation and application.
How much epoxy do I need?
For a two-coat solid-color floor applied by squeegee and back-roller, estimate 100 sq ft per gallon for both coats together: approximately 75 sq ft per 3-quart kit, 150 per 1.5-gallon kit, or 300 per 3-gallon kit. A single base coat beneath flakes or metallics uses a separate rate of approximately 250 sq ft per gallon. Actual use varies with surface and application.
Use the Square Foot Calculator to size your system. Complete a compatible decorative floor with flakes and a clear finish such as PP-80 Clear Polyaspartic. Review the application guides and installation tools.
Epoxy Floor Kit FAQs
Do I need a separate primer?
The epoxy TDS describes the product as self-priming over a properly prepared substrate. Surface condition and moisture requirements determine the appropriate system. Zero VOC does not remove the need for suitable application precautions.
What is the mixing ratio?
The current epoxy TDS specifies two parts A to one part B by volume. Follow the kit label; polyaspartic products use different instructions.
When can I walk or drive on the floor?
Follow the current product and system cure schedule. Temperature, humidity, application and topcoat affect return to service; pot life, recoat time and traffic time are different measurements.
Is clear epoxy UV stable?
Epoxy can amber under UV exposure. Review exposure and coating compatibility when selecting a clear protective finish; epoxy and polyaspartic are different chemistries.