NEW LOWER PRICES — Save 15% on Colored Epoxy & PP-80 Clear. Prices already reduced. Shop Now →
Professional-grade protection for garage, epoxy and decorative flake floors.
Estimate your clear topcoat over decorative flakes.
Estimated PP-80 required:
Round up to available kit quantities. Coverage varies with surface texture and application. This estimate is not a quote or a complete system order.
Calculate My Floor Materials →Give garage, residential and commercial floors a crystal-clear, high-gloss finish with Colored Epoxies PP-80 Clear Polyaspartic. This two-component, 80% solids polyaspartic-polyurea coating provides UV stability, abrasion and impact resistance, and chemical splash and spill resistance.
Use PP-80 Clear as the final protective topcoat over properly prepared, compatible epoxy and decorative flake flooring systems. It enhances the appearance of the base coat and flakes without adding a colored finish.
Not an epoxy base coat or primer: for a decorative flake system, prepare the substrate, apply a compatible colored epoxy base coat, broadcast decorative floor flakes, and finish with PP-80 Clear according to the system instructions.
PP-80 is a polyaspartic-polyurea coating, not a 100% solids epoxy. Its technical sheet lists UV stability and quick drying compared with epoxies. Choose it when a clear, UV-stable protective finish and a shorter return-to-service schedule suit the project. Select each coating for the substrate, exposure and compatible flooring system rather than treating the two chemistries as interchangeable.
| Flake broadcast | Coverage | Application |
|---|---|---|
| Full | 100 sq ft per gallon | Squeegee applied |
| Medium | 140 sq ft per gallon | Dip and roll |
| Light | 180 sq ft per gallon | Dip and roll |
For example, a 500-square-foot floor with full flake broadcast requires approximately 5 gallons of PP-80 at 100 square feet per gallon. Actual coverage varies with porosity, texture and application thickness. Round up to available kit quantities and allow for project conditions.
Calculate My Floor Materials to estimate the base coat, flakes and clear topcoat for your complete floor.
The October 19, 2026 PP-80 TDS lists approximately 15–20 minutes of pot life after mixing at 70–80°F and roughly 50% relative humidity, 3 hours to tack free, 5–7 hours before foot traffic, and 12–24 hours before heavy traffic. These are different measurements, not interchangeable working-time claims. Conditions affect curing; follow the kit label and current TDS before returning a floor to use.
PP-80 is 80% solids by weight (±1%), with VOC content listed as less than 250 g/L. It is not a zero-VOC epoxy. Use proper ventilation and the protective equipment specified in the SDS and TDS.
This page sells the clear protective finish. PP-80 Colored Polyaspartic is sold separately for colored coating applications.
Yes, use it over a properly prepared, compatible epoxy and decorative flake system within the specified recoat conditions. Follow the coating system instructions and test compatibility before application.
The kit sizes are total combined quantities of Part A and Part B. Mix equal volumes of each component; do not treat the listed kit size as the quantity of each part.
The TDS lists UV stability and exterior applications. Confirm the substrate, temperature and exposure meet the application requirements. Direct sun can raise substrate temperature beyond the permitted range.
Read our shipping and return information and customer reviews. Shipping charges and current kit pricing are shown by the store at checkout.
PP-80 Technical Data Sheet — revision October 19, 2026
PP-80 Safety Data Sheet — Parts A & B
Returns: Pre-approved case by case within 30 days — email sales@coloredepoxies.com. Full details are in our shipping & return policy.
Industrial Strength
Built for durability
Easy DIY Application
Quick DIY setup
Made in USA
Manufactured in USA
PP-80 Clear Polyaspartic Topcoat
Overall rating: 5.0 / 5 from 2 reviews.
Review topics: [].
"I used this over two coats of epoxy. It does a great job. It seems super hard and has a great shine. I waited 10 days before parking vehicles on it. So far this has been a terrific product. I only hope this will last a very long time. I know the prep is the most important thing. I grinded the concrete, did the moisture test and ensured the concrete was clean as can be."
"Your material is always the best"
Give garage, residential and commercial floors a crystal-clear, high-gloss finish with Colored Epoxies PP-80 Clear Polyaspartic. This two-component, 80% solids polyaspartic-polyurea coating provides UV stability, abrasion and impact resistance, and chemical splash and spill resistance.
Use PP-80 Clear as the final protective topcoat over properly prepared, compatible epoxy and decorative flake flooring systems. It enhances the appearance of the base coat and flakes without adding a colored finish.
Not an epoxy base coat or primer: for a decorative flake system, prepare the substrate, apply a compatible colored epoxy base coat, broadcast decorative floor flakes, and finish with PP-80 Clear according to the system instructions.
PP-80 is a polyaspartic-polyurea coating, not a 100% solids epoxy. Its technical sheet lists UV stability and quick drying compared with epoxies. Choose it when a clear, UV-stable protective finish and a shorter return-to-service schedule suit the project. Select each coating for the substrate, exposure and compatible flooring system rather than treating the two chemistries as interchangeable.
| Flake broadcast | Coverage | Application |
|---|---|---|
| Full | 100 sq ft per gallon | Squeegee applied |
| Medium | 140 sq ft per gallon | Dip and roll |
| Light | 180 sq ft per gallon | Dip and roll |
For example, a 500-square-foot floor with full flake broadcast requires approximately 5 gallons of PP-80 at 100 square feet per gallon. Actual coverage varies with porosity, texture and application thickness. Round up to available kit quantities and allow for project conditions.
Calculate My Floor Materials to estimate the base coat, flakes and clear topcoat for your complete floor.
The October 19, 2026 PP-80 TDS lists approximately 15–20 minutes of pot life after mixing at 70–80°F and roughly 50% relative humidity, 3 hours to tack free, 5–7 hours before foot traffic, and 12–24 hours before heavy traffic. These are different measurements, not interchangeable working-time claims. Conditions affect curing; follow the kit label and current TDS before returning a floor to use.
PP-80 is 80% solids by weight (±1%), with VOC content listed as less than 250 g/L. It is not a zero-VOC epoxy. Use proper ventilation and the protective equipment specified in the SDS and TDS.
This page sells the clear protective finish. PP-80 Colored Polyaspartic is sold separately for colored coating applications.
Yes, use it over a properly prepared, compatible epoxy and decorative flake system within the specified recoat conditions. Follow the coating system instructions and test compatibility before application.
The kit sizes are total combined quantities of Part A and Part B. Mix equal volumes of each component; do not treat the listed kit size as the quantity of each part.
The TDS lists UV stability and exterior applications. Confirm the substrate, temperature and exposure meet the application requirements. Direct sun can raise substrate temperature beyond the permitted range.
Read our shipping and return information and customer reviews. Shipping charges and current kit pricing are shown by the store at checkout.
PP-80 Technical Data Sheet — revision October 19, 2026
PP-80 Safety Data Sheet — Parts A & B
Size
3 colors available
Color